Watch the Video Introducing ICC
Case Studies
SDS Request Form
Product Selection Survey
 

FEATURES:

Blue Line

ICC 2665:

  • No Nitrites or Phenols
  • No Heavy Metals
  • Formaldehyde-Free
  • Low-Foaming to 3,000 PSI
  • Highly Detergent
  • Rejects Tramp Oils
  • Settles Fines
  • Effective Corrosion Inhibition

ICC 2665-MM:

  • Multi-Metal Semi-Synthetic
  • No Nitrites or Phenols
  • No Heavy Metals
  • Formaldehyde-Free
  • Highly Detergent
  • Rejects Tramp Oils
  • Non-Sticky Residual Film
  • Effective Rust Protection

ICC 2667:

  • Boron-Free Formulation
  • No Nitrites or Phenols
  • No Heavy Metals
  • Non-Foaming
  • Highly Detergent
  • Rejects Tramp Oils
  • Settles Fines
  • Effective Corrosion Inhibition

ICC 343-S:

  • Less Than 10% Mineral Oil
  • General Purpose Grinding
  • Ferrous Metals & Nickel Alloys
  • Corrosion & Rust Protection
  • Highly Detergent
  • Low-Foaming
  • Hard Water Compatible
  • Promotes Fine Finishes
 

Semi-Synthetic Machining & Grinding Coolants

Custom Machining & Grinding Coolants

International Chemical Company is very proud to manufacture a highly efficient line of water-soluble, semi-synthetic metalworking and metal cutting fluids engineered for machining and grinding operations of all kinds. In some operations, a little mineral oil can go a long way. Over the years, semi-synthetic machining and grinding coolants have compiled an inconsistent service record and earned a reputation for performing well, but just not well enough. But with the advent of new synthetic technology, ICC is proud to offer the finest semi-synthetic machining and grinding coolants in the industry. These robust and expertly-blended manufacturer’s chemicals are economical and high performance alternatives to conventional straight oil machining and grinding coolants.

Featured Semi-Synthetic Machining and Grinding Coolants:

International Compound 2665 is a heavy-duty, low-foaming and non-misting, water-soluble semi-synthetic machining and grinding coolant that is engineered for operations utilizing ferrous and non-ferrous metals including automotive grades of cast aluminum. It contains full-synthetic lubricants, inhibitors, advanced polymers and detergents to obtain optimum metal removal capabilities, excellent and prolonged tool life, as well as superior corrosion inhibition. Its highly detergent solutions contain no nitrites, phenols or heavy metals and remain fresh and clean for extended sump life.

International Compound 2665-MM is a semi-synthetic, moderate-duty, water-soluble coolant engineered for machining and grinding operations utilizing ferrous and non-ferrous metals.  If left unrinsed on machined components, the residual film is formulated to be non-staining to sensitive alloys—including automotive grades of cast aluminum—and provide superior corrosion protection for both work pieces and tooling. Full synthetic lubricants, advanced polymers and detergents promote excellent and prolonged tool life, as well as provide operating solutions that remain fresh and clean for extended sump life.

International Compound 2667 is a boron-free, moderate- to heavy-duty, non-foaming and non-misting, water-soluble semi-synthetic machining and grinding coolant that is engineered for central-system operations utilizing both ferrous and non-ferrous metals including cast iron. It is formulated with full-synthetic lubricants, inhibitors, advanced polymers and effective detergents to obtain optimum metal removal capabilities, excellent and prolonged tool life, as well as superior corrosion inhibition. Its highly detergent solutions contain no nitrites, phenols or heavy metals and remain fresh and clean for extended sump life.

International Compound 343-S is a general purpose, semi-synthetic grinding coolant engineered for use with all ferrous metals and nickel alloys. It is specially formulated to minimize the formation of insoluble, hard water soaps, thereby increasing the performance and life of the bath. ICC 343-S contains less than 10% mineral oil content to enhance its all-important lubricating properties. It is formulated for use as a semi-synthetic grinding coolant and provides excellent in-process rust protection. It is a low-foaming, highly detergent and very economical metalworking fluid.

 

We look forward to hearing from you!

 
Company
Contact Us
Products
 
 
 
 
 
 
Laboratory
Service
Distributors
 
   

Home | Company | Contact Us | Products | Laboratory | Service | Distributors & Licensees
Drawing and Stamping
| Machining and Grinding | Vibratory and Burnishing
Spray and Immersion Cleaning | Industrial Rust and Corrosion Prevention

International Chemical Company

2628-48 N. Mascher St.

Philadelphia, PA 19133

1-888-CALL-ICC

info@e-icc.com

© Copyright 2013 International Chemical Co.
All Rights Reserved
Website Design by DDA

find us on facebook